Shuttering Magnet, 800 KG Precast Concrete Magnets for Sandwich Panel Wall Panel Formwork System
Product Description
Vertical suction: ≥800kgs
Size: 19 x 9.5 x 4 cm
N.W.: 2.6kgs
Be suitable for fixing mold of sandwich panel, inner and outer wall panel
suitable mold height recommended: 50-80mm
Instruction
There is an ON/OFF button on the top of the shuttering magnets. At work state, press the button, magnet box fixed the shuttering on the platform firmly, Pull up the button with lever, magnet box is at closed state and can be moved.
(1) The suction of magnet box is based on thickness and smooth degree of the platform, the thicker and smoother the better. And lateral shear force depends on the suction of magnet box and the friction coefficient of the touching surface.
(2) Two screws on two sides of the magnet box can be connected with different adapter, fix different formworks, such as steel angle, steel channel, etc.
(3) SAIXIN® magnet box is made of permanent neodymium magnets, In theory, if the MAX working temperature is below 80℃ and the magnet is not damaged or corroded, the suction will be lasted forever.
Maintenance&Safety Guidelines
（1）In order to avoid the magnet box damaging, do not crash and use hard tools to knock it. Please knock with rubber hammer if must use tools.
（2) Shuttering Magnet box touching surface should be kept clean and smooth, avoid the scrap iron or concrete grout going inside the box, otherwise the button flexible degree will be affected and the magnet will be slanted, caused the magnet can not be fixed on the platform closely and the suction weakened.
（3）As suction of magnet box is very strong, please avoid closing it to precision instruments,electronic instruments and other iron material. Once they absorb together, it is difficult to separate. Suggest making special tool box to keep them.
（4）Shuttering Magnet box touching surface should be kept clean and smooth always. And it should be oiled when storage. Max working and storage temperature should be below 80℃,and no corrosive medium around. Always check if the working surface fix the platform closely and the button flexible degree to ensure the normal use.
（5）After using , clean the magnet boxes, and put on stainless steel tool holder. Do not use iron tool holder.
SX-800 Holding Force Testing
SX-800 Shuttering Magnet Holding Force Testing